Reco RAC900 Magnetic

RAC-900 Access Control Terminal Stand alone or on-line with PC , It is capable to connect up to 255 sets through RS-485. 4096 records and badges storage capacity. 8 time zones and 60 sets of specific time to monitor access. Additional visitor and patrol guard card could be produced. Duress code/card function to enhance personnel safety. Capability to connect to external modem and auto dial machine for reporting to head office in case of any emergency. Provides master card for programming and middle level master card to enable / disable security function. LCD displays English name (2048 badges mode). Could set special code to activate and release siren. Anti-passback functions to control access for both in and out. Open door by swiping card , pin code or both. Tamper alarm for anti-casing open to enhance system security. System will warm when memory buffer is 90% full. Programmable maximum swipe card failure. 5 Sensor inputs and 2 relay outputs for security accessories. Changeable pin code directly from controller ( only in Windows application software ). Built-in RTC. HARDWARE Reader- Barcode Infra red slot reader: resolution 0.15mm, Scanning speed: 100~1000mm/sec. Reader- Magnetic stripe ISO Standard Track:T1,T2,T3 Scanning speed: 3~40ips Proximity reader Wiegand 26 bit, EM 125 KHz Input device 2 Sensor (Push button, Door sensor) Output device 2 Relay (Lock, Alarm) Indicators LCD display(16 characters x 2 rows) Keypad 15 keys Beep tone Buzzer Memory 128K Communication interface RS-232, RS-422, RS-485 ELECTRICAL Operating voltage DC 12V~25V @ 500mA Power consumption 5W (max) Baud rate 9600bps-N-8-1 ENVIRONMENTAL Operating temperature 0~50 / 32 ~122 Relative humidity 20%~95% (Non condensing) PHYSICAL Dimensions 153mm(L) x 120mm(W) x 60mm(H) Weight 450g